ACC Lane Assist Camera Repairs Australia-Wide

ADAS Camera Diagnostics, Testing & Electronic Repair

Euro Car Electronics provides Australia-wide and international mail-in repair for ACC, Lane Assist and ADAS camera modules used in modern European vehicles.

We diagnose and repair electronic faults affecting front cameras, driver assistance systems and related safety modules at component level.

  • Australia-wide & international mail-in service 🌍
  • ADAS and ACC camera specialists
  • Component-level PCB and BGA repair
  • Bench testing and diagnostics

Start Your Repair Order or 📞 Call the Workshop

Audi Front View ACC Radar Lane Assist Camera for A6 A7 A8 OEM – New FBGA Chip Installed + 2-Year Warranty
Skip to the beginning of the images gallery Mercedes vehicles ADAS Calibration service for lane keeping system and adaptive cruise control

🔍 Common ACC & Lane Assist Camera Fault Symptoms

  • ACC unavailable or not functioning
  • Lane Assist malfunction warnings
  • Front Assist or emergency braking disabled
  • Camera communication faults
  • Calibration failing or not completing
  • No communication with camera module
  • Intermittent ADAS faults
  • Driver assistance systems disabled after collision or water ingress

Many of these faults are caused by internal electronic failure inside the camera module rather than calibration alone.

Recognise one of these issues? Start your repair order.

⚠️ Why Replacing The Camera Is Not Always The Best Option

  • New modules can be extremely expensive
  • Used modules may contain the same faults
  • Replacement often requires coding and calibration
  • Availability for older systems can be limited

Repairing the original module often avoids compatibility and setup issues.

🧠 What Do We Repair?

We repair a wide range of ADAS and camera-related electronic faults, including:

  • Internal PCB damage
  • BGA processor failure
  • Water ingress and corrosion
  • Power supply and communication faults
  • Connector and solder joint damage
  • Intermittent thermal-related faults

Many camera modules are extremely expensive to replace and often require complex coding and calibration after replacement.

📦 How Our Mail-In Repair Process Works

  1. Submit your repair order or contact us with fault codes and symptoms
  2. Package and send the camera module to our workshop
  3. We test and diagnose the unit
  4. You receive repair confirmation or quote approval
  5. Your repaired module is returned ready for reinstall and calibration

Depending on the vehicle platform, recalibration may still be required after reinstall.

🚗 Supported Vehicle Platforms

We regularly repair ADAS and ACC camera systems from:

  • Audi / Volkswagen / Skoda
  • Mercedes-Benz
  • BMW / Mini
  • Porsche

We also support many other modern camera and driver assistance systems where applicable.

🌍 International Mail-In Repair Service

ACC and Lane Assist camera repairs are one of our specialist international mail-in services.

We regularly receive modules from workshops and vehicle owners across Australia and overseas for testing and repair.

⚠️ Not Sure If The Camera Module Is Faulty?

Some ADAS faults may also be caused by:

  • Wiring faults
  • Radar sensor issues
  • Battery voltage problems
  • Calibration errors
  • CAN communication faults

If you’re unsure, send us:

  • Fault codes
  • Camera part number
  • Photos or videos of the issue

This helps us determine whether the camera module is likely to be repairable before work begins.

👉 Related services include advanced vehicle diagnostics, electronic PCB repairs and BGA reballing.

🛡 Trust & Repair Information

  • Bench-tested where applicable
  • Component-level diagnostics before repair
  • Customers contacted before non-standard repairs
  • International repair enquiries welcome

If a module is determined to be non-repairable, we will advise accordingly after assessment.

🔧 Start Your Repair Order

Start your repair order or 📞 Call the Workshop

  • Australia-wide & international mail-in service
  • ADAS and ACC camera specialists
  • Component-level diagnostics and repair

Welcome to Euro Car Electronics! Our Service Guide provides a general overview of the different levels of repair complexity and what each entails. Please note that the prices listed below are starting prices and are displayed only as a guide.

How to Get Started with Your Diagnostics:

  1. Submit Your Diagnostic Scan:

    Email a diagnostic scan of your vehicle to [email protected].

  2. Pack the part responsibly and send it via Express Post to the following address:

    Euro Car Electronics
    FAO: Electronic Dept.
    45 Wises Road
    4556 Buderim QLD

We will conduct a comprehensive diagnosis of your part and contact you with a detailed fault report and repair quote. If you choose to proceed with the repair, we will invoice you for any special order and/or not in-stock parts required.

We are conveniently located in the heart of Sunshine Coast, and we service clients Australia-wide.

1. Platinum Priority

Service Package
$ 495
  • Diagnostics: 24 hours
  • Pre-assessment & Quote: Included
  • Comprehensive Diagnostics: Included
  • Diagnostic Report: Included
  • Minor Problem Repair: Included
  • Additional Services: Research, Trace Repairs, Test & Precision Instruments, Industrial Machinery, High Voltage (includes 2 hours diagnosis & repair time)
24 Hours

2. Gold Priority

Service Package
$ 395
  • Diagnostics: 48 hours
  • Pre-assessment & Quote: Included
  • Comprehensive Diagnostics: Included
  • Diagnostic Report: Included
  • Minor Problem Repair: Included
  • Additional Services: Research, Trace Repairs, Test & Precision Instruments, Industrial Machinery, High Voltage (includes 2 hours diagnosis & repair time)
48 Hours

3. Silver Priority

Service Package
$ 295
  • Diagnostics: 5 to 10 business days
  • Pre-assessment & Quote: Included
  • Comprehensive Diagnostics: Included
  • Diagnostic Report: Included
  • Minor Problem Repair: Included
  • Includes 2 hours diagnosis & repair time
Best value